NOTICE: This version of the NSF Unidata web site (archive.unidata.ucar.edu) is no longer being updated.
Current content can be found at unidata.ucar.edu.
To learn about what's going on, see About the Archive Site.
NOTICE: This version of the NSF Unidata web site (archive.unidata.ucar.edu) is no longer being updated.
Current content can be found at unidata.ucar.edu.
To learn about what's going on, see About the Archive Site.
I created projection files grid519119.xml and grid6161.xml; can you access files from ftp://ftp.nrlmry.navy.mil/receive/serrae/awips2/? Efren A. Serra (Contractor) SAIC/DeVine Consulting, Inc. Naval Research Laboratory Marine Meteorology Division 7 Grace Hopper Ave., STOP 2 Monterey, CA 93943 Code 7542 Office: 831-656-4780 From: Michael James [mailto:mjames@xxxxxxxx] Sent: Monday, April 03, 2017 2:01 PM To: Serra, Mr. Efren, Contractor, Code 7531 Cc: awips2-users@xxxxxxxxxxxxxxxx Subject: Re: [awips2-users] Display a New Grid in D2D You didn't mention creating a projection file in /awips2/edex/data/utility/edex_static/base/grib/grids/ - perhaps you did but did not mention it, but if not it would explain why the name isn't being taken. Feel free to send me your new files from /awips2/edex/data/utility/edex_static/base/grib/models and /awips2/edex/data/utility/edex_static/base/grib/grids/ (and an example grib file if possible), and I'll take a look on my end. Michael James Unidata Program Center Boulder, CO On Mon, Apr 3, 2017 at 2:58 PM, Serra, Mr. Efren, Contractor, Code 7531 <efren.serra.ctr@xxxxxxxxxxxxxxx<mailto:efren.serra.ctr@xxxxxxxxxxxxxxx>> wrote: I re-started edex_camel and re-insgested manually, but it’s still ‘GribModel:…’ in Product Browser and in grid_info table in “psql metada.” Efren A. Serra (Contractor) SAIC/DeVine Consulting, Inc. Naval Research Laboratory Marine Meteorology Division 7 Grace Hopper Ave., STOP 2 Monterey, CA 93943 Code 7542 Office: 831-656-4780<tel:(831)%20656-4780> From: Michael James [mailto:mjames@xxxxxxxx<mailto:mjames@xxxxxxxx>] Sent: Monday, April 03, 2017 1:49 PM To: Serra, Mr. Efren, Contractor, Code 7531 Cc: awips2-users@xxxxxxxxxxxxxxxx<mailto:awips2-users@xxxxxxxxxxxxxxxx> Subject: Re: [awips2-users] Display a New Grid in D2D On Mon, Apr 3, 2017 at 2:37 PM, Serra, Mr. Efren, Contractor, Code 7531 <efren.serra.ctr@xxxxxxxxxxxxxxx<mailto:efren.serra.ctr@xxxxxxxxxxxxxxx>> wrote: Hi – I went through the sequence of steps in Adding a new grid to EDEX below; most of it worked, with the exception of the model name in the Product Browser under Grid. The model names display are “GribModel:52:0:30” and “GribModel:58:10:0”, instead of name as specified in the gribModels_NRLMMD-52.xml and gribModels_NRLMMD-58.xml files, e.g.,. which I placed under: 1. /awips2/edex/data/utility/edex_static/base/grib/models 2. /awips2/edex/data/utility/edex_static/site/MON/grib/models (MON stands for MONTEREY) Are these correct?! Thanks for your help. Image attached shows the names displayed in the Product Browser. Both locations are correct but the second one is unnecessary unless you want to supersede any of the definitions in the first. I can't tell if you restarted/re-ingested after making these changes... after adding or editing files in /awips2/edex/data/utility/edex_static/base/grib/models you will need to restart edex (service edex_camel restart) and re-ingest the grib files again (copy again to /awips2/data_store/manual). If you already did restart/reingest then there is something else which needs to be resolved, and we'll have to look at your new grid projection file and these model definitions more closely. Let me know if this is the case and we can continue this off-list. -Michael
awips2-users archives: