NOTICE: This version of the NSF Unidata web site (archive.unidata.ucar.edu) is no longer being updated.
Current content can be found at unidata.ucar.edu.
To learn about what's going on, see About the Archive Site.
NOTICE: This version of the NSF Unidata web site (archive.unidata.ucar.edu) is no longer being updated.
Current content can be found at unidata.ucar.edu.
To learn about what's going on, see About the Archive Site.
Hi Bill, If you haven't already, check to be sure that SELinux is not enabled on your system, to rule out that as a problem. On Redhat/Centos, this can be found in /etc/sysconfig/selinux. Modify the line that starts with SELINUX so that is set to "disabled". Then reboot the system. --Kevin _____________________________________________ Kevin Tyle, Systems Administrator Dept. of Atmospheric & Environmental Sciences University at Albany Earth Science 235, 1400 Washington Avenue Albany, NY 12222 Email: ktyle@xxxxxxxxxx Phone: 518-442-4578 _____________________________________________ -----Original Message----- From: gembud-bounces@xxxxxxxxxxxxxxxx [mailto:gembud-bounces@xxxxxxxxxxxxxxxx] On Behalf Of Capehart, William J Sent: Monday, June 04, 2012 2:38 PM To: gembud@xxxxxxxxxxxxxxxx Subject: Re: [gembud] GEMPAK 6.6.0 Segmentation Faults (Mandriva 2011.0 64-bit) Hi All I've tried compiling OM 2.3.3 and 2.3.1 from source and have also tried the Mandriva builds generously offered by James Murakami (rebuilding and testing after each) and unfortunately I am still coming up seg faults. In "gdb-ing" garp, nmap2 and nwx, I'm getting the following output -- all of them are hanging on the following: 0x00007ffff5a2bc50 in __parse_one_specmb () from /lib64/libc.so.6 (which is greek to me and my people here.) Any further ideas? Thanks Much Bill ----- GARP GDB OUTPUT (crashes before gui appears, segmentation faults out) % gdb garp GNU gdb (GDB) 7.1-5 (Mandriva Linux release 2011.0) Copyright (C) 2010 Free Software Foundation, Inc. License GPLv3+: GNU GPL version 3 or later <http://gnu.org/licenses/gpl.html> This is free software: you are free to change and redistribute it. There is NO WARRANTY, to the extent permitted by law. Type "show copying" and "show warranty" for details. This GDB was configured as "x86_64-mandriva-linux-gnu". For bug reporting instructions, please see: <http://www.gnu.org/software/gdb/bugs/>... Reading symbols from /usr/local/GEMPAK-6.6.0_GNU64/os/linux64/bin/garp...done. (gdb) run Starting program: /usr/local/GEMPAK-6.6.0_GNU64/os/linux64/bin/garp G A R P - v2.1 starting... Program received signal SIGSEGV, Segmentation fault. 0x00007ffff5a2bc50 in __parse_one_specmb () from /lib64/libc.so.6 (gdb) ----------------------- NMAP2 GDB OUTPUT (creates an empty gui: empty gray top bar, black veiwing area, then segmentation faults out) % gdb nmap2 GNU gdb (GDB) 7.1-5 (Mandriva Linux release 2011.0) Copyright (C) 2010 Free Software Foundation, Inc. License GPLv3+: GNU GPL version 3 or later <http://gnu.org/licenses/gpl.html> This is free software: you are free to change and redistribute it. There is NO WARRANTY, to the extent permitted by law. Type "show copying" and "show warranty" for details. This GDB was configured as "x86_64-mandriva-linux-gnu". For bug reporting instructions, please see: <http://www.gnu.org/software/gdb/bugs/>... Reading symbols from /usr/local/GEMPAK-6.6.0_GNU64/os/linux64/bin/nmap2...done. (gdb) run Starting program: /usr/local/GEMPAK-6.6.0_GNU64/os/linux64/bin/nmap2 [Thread debugging using libthread_db enabled] Finished reading tables... Resource File: /usr/local/GEMPAK-6.6.0_GNU64/resource/Nmap Program received signal SIGSEGV, Segmentation fault. 0x00007ffff580fc50 in __parse_one_specmb () from /lib64/libc.so.6 (gdb) quit -------------- GDB NWX OUTPUT (opens, provides a gui, lets me poke on a station for obs data, then crashes with the same seg fault) % gdb nwx GNU gdb (GDB) 7.1-5 (Mandriva Linux release 2011.0) Copyright (C) 2010 Free Software Foundation, Inc. License GPLv3+: GNU GPL version 3 or later <http://gnu.org/licenses/gpl.html> This is free software: you are free to change and redistribute it. There is NO WARRANTY, to the extent permitted by law. Type "show copying" and "show warranty" for details. This GDB was configured as "x86_64-mandriva-linux-gnu". For bug reporting instructions, please see: <http://www.gnu.org/software/gdb/bugs/>... Reading symbols from /usr/local/GEMPAK-6.6.0_GNU64/os/linux64/bin/nwx...done. (gdb) run ================================================================ Bill Capehart <William.Capehart@xxxxxxxxx> Associate Professor Department of Atmospheric Sciences 213 Mineral Industries Building Skype/EVO: wcapehart South Dakota School of Mines and Technology Ph: +1-605-394-1994 501 East Saint Joseph Street Fax: +1-605-394-6061 Rapid City, SD 57701-3995 Mobile: +1-605-484-5692 =================== http://capehart.sdsmt.edu ================== ________________________________________ From: James Murakami [tenki@xxxxxxxxxxxxxx] Sent: Friday, June 01, 2012 4:47 PM To: Capehart, William J Cc: gembud@xxxxxxxxxxxxxxxx Subject: Re: [gembud] GEMPAK 6.6.0 Segmentation Faults (Mandriva 2011.0 64-bit) Hi William, Unless Michael James says otherwise, I think you'll need to compile OpenMotif 2.3.3(version 2.3.2 is flawed with respect to Gempak...2.3.1 is O.K. if you have it). We run Gempak6.6.0 on workstations running on Mandriva 2010.2(64 bit), and I haven't seen the segmentation errors you describe. Garp does crash when you try opening NIDS data or you clear/reset some graphics, which have station overlays. However, since Garp isn't supported anymore, and you can do similar things using Nmap, it's no big deal for us. James ---------------------------------------------- James Murakami Staff Meteorologist/Student Affairs Department of Atmospheric and Oceanic Sciences University of California, Los Angeles 405 Hilgard Ave. Los Angeles, CA 90095-1565 e-mail: tenki@xxxxxxxxxxxxxx<mailto:tenki@xxxxxxxxxxxxxx> telephone: 310-825-2418 Fax: 310-206-5219 ---------------------------------------------- On 06/01/2012 03:27 PM, Capehart, William J wrote: Michael: OpenMotif comes as an RPM in the Mandriva-64 2011 Powerpack distribution: Version: 2.3.2-1mdv2010.0 Currently installed version: 2.3.2-1mdv2010.0 Group: Development/C Architecture: x86_64 Size: 25079 KB Medium: None (installed) Do you recommend that we build a /usr/local/ install of it? From: Michael James <mjamesis@xxxxxxxxx<mailto:mjamesis@xxxxxxxxx>> To: "gembud@xxxxxxxxxxxxxxxx<mailto:gembud@xxxxxxxxxxxxxxxx>" <gembud@xxxxxxxxxxxxxxxx<mailto:gembud@xxxxxxxxxxxxxxxx>> Subject: Re: [gembud] GEMPAK 6.6.0 Segmentation Faults (Mandriva 2011.0 64-bit) William, I've seen this happen with NPROGS when OpenMotif is installed as a pre-compiled RPM. Is that the case here or did you build OpenMotif from source? -Michael On Fri, Jun 1, 2012 at 3:47 PM, Capehart, William J <William.Capehart@xxxxxxxxx<mailto:William.Capehart@xxxxxxxxx>> wrote: We've been able to install GEMPAK 6.6.0 on our Mandriva 2011.0 (64-bit) machines and have had good results with the command line programs (e.g,. SFLIST) as well as the graphics scripts (e.g., SFMAP). However, with the GUIs, we've had nothing but segmentation faults for NMAP2 and GARP. Sample for NMAP2: /home/temp/gempaktest]% nmap2 Finished reading tables... Resource File: /usr/local/GEMPAK-6.6.0_GNU64/resource/Nmap (empty gray GUI comes on the screen very briefly and then...) Segmentation fault (core dumped) Other Sample for GARP temp@sky:/home/temp/gempaktest]% garp G A R P - v2.1 starting... Segmentation fault (core dumped) (no flash of a GUI at all) We get good results with NSHARP. NWX runs but does not access any of the data. We have Open Motif 2.3.2 and the gcc/gfortran 4.6.1 compilers Our Makefile seems to be pointing at the correct libraries and includes.... Has anyone else had luck building with Mandriva and recent versions of GEMPAK? ================================================================ Bill Capehart <William.Capehart@xxxxxxxxx<mailto:William.Capehart@xxxxxxxxx>> Associate Professor Department of Atmospheric Sciences 213 Mineral Industries Building Skype/EVO: wcapehart South Dakota School of Mines and Technology Ph: +1-605-394-1994<tel:%2B1-605-394-1994> 501 East Saint Joseph Street Fax: +1-605-394-6061<tel:%2B1-605-394-6061> Rapid City, SD 57701-3995 Mobile: +1-605-484-5692<tel:%2B1-605-484-5692> =================== http://capehart.sdsmt.edu ================== _______________________________________________ gembud mailing list gembud@xxxxxxxxxxxxxxxx<mailto:gembud@xxxxxxxxxxxxxxxx> For list information or to unsubscribe, visit: http://www.unidata.ucar.edu/mailing_lists/ _______________________________________________ gembud mailing list gembud@xxxxxxxxxxxxxxxx<mailto:gembud@xxxxxxxxxxxxxxxx> For list information or to unsubscribe, visit: http://www.unidata.ucar.edu/mailing_lists/ _______________________________________________ gembud mailing list gembud@xxxxxxxxxxxxxxxx For list information or to unsubscribe, visit: http://www.unidata.ucar.edu/mailing_lists/
gembud archives: