Re: [idvusers] Unable to create working 3D netcdf field

• To: idvusers@xxxxxxxxxxxxxxxx
• Subject: Re: [idvusers] Unable to create working 3D netcdf field
• From: John Caron <caron@xxxxxxxxxxxxxxxx>
• Date: Thu, 10 Jun 2010 12:59:24 -0600

On 6/10/2010 12:56 PM, wsession@xxxxxxxxxxx wrote:

When I attempt to create a 3D isosurface, I get the following error:

Couldn't get data
SampledSet.init_samples: sample#2 length 1620000 doesn't match expected
length 1624500

The netcdf file is a lat/lon grid (-179.5-179.5 W/E, -89.5-89.5 S/N   1x1
deg) with 25 vertical sigma levels.  The 3D fields I'm interested in are
pressure and extinction (sigma x lat x lon).  The file opens fine in
NCVIEW, NCL, and IDL, so this may be a CF standards issue.

IDV 2.8u1 on RH Linux.

Here is the ncdump header information for the file, if this helps:

netcdf farop {
dimensions:
         lon = 360 ;
         lat = 180 ;
         sigma = 25 ;
variables:
         float longitude(lon) ;
                 longitude:long_name = "longitude" ;
                 longitude:standard_name = "longitude" ;
                 longitude:units = "degrees_east" ;
         float latitude(lat) ;
                 latitude:long_name = "latitude" ;
                 latitude:standard_name = "latitude" ;
                 latitude:units = "degrees_north" ;
         float pressure(sigma, lat, lon) ;
                 pressure:long_name = "pressure" ;
                 pressure:units = "hPa" ;
                 pressure:positive = "down" ;
                 pressure:standard_name = "air_pressure" ;
         float surface_pressure(lat, lon) ;
                 surface_pressure:long_name = "surface pressure" ;
                 surface_pressure:units = "hPa" ;
                 surface_pressure:coordinates = "longitude latitude" ;
         float aerosol_extinction(sigma, lat, lon) ;
                 aerosol_extinction:long_name = "aerosol extinction" ;
                 aerosol_extinction:units = "1/m" ;
                 aerosol_extinction:coordinates = "pressure longitude
latitude" ;
         float ptop ;
                 ptop:long_name = "pressure at top of model" ;
                 ptop:units = "hPa" ;
         float sigma(sigma) ;
                 sigma:long_name = "sigma at layer midpoints" ;
                 sigma:standard_name = "atmosphere_sigma_coordinate" ;
                 sigma:formula_terms = "sigma: sigma ps: surface_pressure
ptop: ptop" ;

// global attributes:
                 :Conventions = "CF-1.0" ;
}


_______________________________________________
idvusers mailing list
idvusers@xxxxxxxxxxxxxxxx
For list information, to unsubscribe, visit: 
http://www.unidata.ucar.edu/mailing_lists/

Hi:

Can you put the file on an HTTP or FTP server so we can download? thanks

John

• References:
  • [idvusers] Unable to create working 3D netcdf field
    • From: wsession