NOTICE: This version of the NSF Unidata web site (archive.unidata.ucar.edu) is no longer being updated.
Current content can be found at unidata.ucar.edu.
To learn about what's going on, see About the Archive Site.
NOTICE: This version of the NSF Unidata web site (archive.unidata.ucar.edu) is no longer being updated.
Current content can be found at unidata.ucar.edu.
To learn about what's going on, see About the Archive Site.
Hi Tom, all,
Thanks for the response -- I realize I probably should have attached the
ldmd.conf files for both machines. (*truncated to the relevant stuff...)
Twister (ldmd.conf):
# Giving permission to your own machine and Unidata
allow ANY
^((localhost|loopback)|(127\.0\.0\.1\.?$)|([a-z].*\.unidata\.ucar\.edu\.?$))
allow ANY-NLDN weather.bgsu.edu
allow ANY polarmet12.mps.ohio-state.edu
allow ANY 128.146.194.17
#128.146.194.17 is twister2
Twister 2 (ldmd.conf):
REQUEST IDS|DDPLUS ".*" twister.sbs.ohio-state.edu
-=-=-==-
ALLOW ANY ^((localhost|loopback)|(127\.0\.0\.1\.?$))
ALLOW ANY twister.sbs.ohio-state.edu
For what it's worth the error in Twister's log doesn't occur until I either
restart or stop the LDM on Twister 2 -- not when I start it as I erroneously
stated below.
-- Phil
On Jul 8, 2011, at 11:35 AM, Tom McDermott wrote:
> Phil,
>
> Make sure you have ALLOW statements for both hosts in their respective
> ldmd.conf files. You may have to use the IP address for twister2 instead of
> the hostname until it's on DNS.
>
> Tom
> ----------------------------------------------------------------------------
> Tom McDermott 305 Lennon Hall
> Systems Administrator Email: tmcderm@xxxxxxxxxxxxxxxxx
> Department of the Earth Sciences Phone: (585) 395-5718
> The College at Brockport Fax: (585) 395-2416
> State University of New York
>
> On Fri, 8 Jul 2011, Phil Birnie wrote:
>
>> Hi Everyone,
>>
>> We are getting ready to upgrade to a new machine and are in the process of
>> installing LDM 6.9.8 and have run into a couple of snags. I apologize if
>> the answers to these questions are somewhat elementary.
>>
>> Right now we have the new machine (Twister2) as the downstream LDM to the
>> current machine(Twister); however, we can't seem to send anything to the new
>> machine.
>>
>> Our setup is as follows:
>>
>>
>> Upstream LDMs for Twister
>> |
>> ============ FIREWALL ============
>> |
>> |
>> Twister (twister.sbs.ohio-state.edu -- LDM v. 6.7.0)
>> |
>> |
>> Twister2 (128.146.191.17 -- twister2.sbs.ohio-state.edu not active on
>> DNS yet -- LDM v. 6.9.8)
>>
>> I can't even find the LDM logs on Twister2 for some reason (ran
>> --enable-logging=local0 when configuring & ldmd.log is empty nor is there
>> any info in /var/log/messages), but in Twister's LDM logs I found that
>> Twister2 can connect, but we receive the following error (just once per
>> ldmadmin start occurrence):
>>
>> LDMD.LOG OUTPUT FROM TWISTER:
>>
>> Jul 08 05:41:45 twister 128.146.194.17(feed)[26069] NOTE: Starting
>> Up(6.7.0/6): 20110708054322.793 TS_ENDT {{ANY, ".*"}},
>> SIG=0908bdc773bda996582bd23bf9192761, Primary
>> Jul 08 05:41:45 twister 128.146.194.17(feed)[26069] NOTE: topo:
>> 128.146.194.17 {{ANY, (.*)}}
>> Jul 08 05:43:51 twister 128.146.194.17(feed)[26069] ERROR: Couldn't flush
>> connection; nullproc_6() failure to 128.146.194.17: RPC: Unable to receive;
>> errno = Connection reset by peer
>> Jul 08 05:43:51 twister rpc.ldmd[25241] NOTE: child 26069 exited with status
>> 6
>>
>>
>> NOTIFYME OUTPUT FROM TWISTER2 TO TWISTER:
>>
>> [ldm@twister2 ~]$ notifyme -vl - -h twister.sbs.ohio-state.edu
>> Jul 08 16:02:16 notifyme[27739] NOTE: Starting Up:
>> twister.sbs.ohio-state.edu: 20110708160216.486 TS_ENDT {{ANY, ".*"}}
>> Jul 08 16:02:16 notifyme[27739] NOTE: LDM-5 desired product-class:
>> 20110708160216.486 TS_ENDT {{ANY, ".*"}}
>> Jul 08 16:02:16 notifyme[27739] INFO: Resolving twister.sbs.ohio-state.edu
>> to 128.146.194.91 took 0.002285 seconds
>> Jul 08 16:02:16 notifyme[27739] NOTE: NOTIFYME(twister.sbs.ohio-state.edu):
>> OK
>>
>> LDMPING OUTPUT FROM TWISTER2 TO TWISTER:
>>
>> [ldm@twister2 ~]$ ldmping twister.sbs.ohio-state.edu
>> Jul 08 16:03:12 INFO: State Elapsed Port Remote_Host
>> rpc_stat
>> Jul 08 16:03:12 INFO: Resolving twister.sbs.ohio-state.edu to 128.146.194.91
>> took 0.00143 seconds
>> Jul 08 16:03:12 INFO: RESPONDING 0.003019 388 twister.sbs.ohio-state.edu
>> Jul 08 16:03:37 INFO: RESPONDING 0.001562 388 twister.sbs.ohio-state.edu
>> Jul 08 16:04:03 INFO: RESPONDING 0.265208 388 twister.sbs.ohio-state.edu
>>
>>
>> I tried installing the LDM on my home computer and was able to send data
>> from Twister (home computer is obviously outside of the firewall)
>>
>>
>> Any help regarding the logging and/or connection is very much appreciated.
>> Thanks for any help in advance -- back to searching the support archives...
>>
>>
>> -- Phil Birnie
>> Department of Geography, The Ohio State University
>> (614)519-6176
>>
>>
>>
>>
ldm-users archives: