NOTICE: This version of the NSF Unidata web site (archive.unidata.ucar.edu) is no longer being updated.
Current content can be found at unidata.ucar.edu.
To learn about what's going on, see About the Archive Site.
NOTICE: This version of the NSF Unidata web site (archive.unidata.ucar.edu) is no longer being updated.
Current content can be found at unidata.ucar.edu.
To learn about what's going on, see About the Archive Site.
Thank you, Rebecca! Sorry to hear of all of the troubles, and thanks to your team for all of the hard work. I remember back in the early 1990s, events like this would mean no models for several days, no DDPLUS|HRS for 24 hours. At least a lot of things ARE working, even if they aren’t fully redundant yet, so things are much better than they once were. And thanks for the updates! Gilbert Gilbert Sebenste Staff Meteorologist Environmental Health and Safety Labs for Wellness 154 | DeKalb, Illinois 60115 815-753-5492 gilbert@xxxxxxx<mailto:gilbert@xxxxxxx> http://weather.admin.niu.edu<http://weather.admin.niu.edu/> Everyone. Home. Safely. [NIU] From: ldm-users-bounces@xxxxxxxxxxxxxxxx [mailto:ldm-users-bounces@xxxxxxxxxxxxxxxx] On Behalf Of Phil Birnie Sent: Thursday, February 22, 2018 1:26 PM To: Rebecca Cosgrove - NOAA Federal <rebecca.cosgrove@xxxxxxxx>; Pete Pokrandt <poker@xxxxxxxxxxxx> Cc: ldm-users@xxxxxxxxxxxxxxxx; support-conduit@xxxxxxxxxxxxxxxx <conduit@xxxxxxxxxxxxxxxx> Subject: Re: [ldm-users] [conduit] Missing GFS files on conduit this morning Same as Pete — Thank you so much for the hard work and update, Rebecca! - Phil Birnie Ohio State Univ. Dept. of Geography From: Pete Pokrandt <poker@xxxxxxxxxxxx><mailto:poker@xxxxxxxxxxxx> Reply: Pete Pokrandt <poker@xxxxxxxxxxxx><mailto:poker@xxxxxxxxxxxx> Date: February 22, 2018 at 2:22:08 PM To: Rebecca Cosgrove - NOAA Federal <rebecca.cosgrove@xxxxxxxx><mailto:rebecca.cosgrove@xxxxxxxx>, Phil Birnie <me@xxxxxxxxxxxxxx><mailto:me@xxxxxxxxxxxxxx> Cc: ldm-users@xxxxxxxxxxxxxxxx<mailto:ldm-users@xxxxxxxxxxxxxxxx> <ldm-users@xxxxxxxxxxxxxxxx><mailto:ldm-users@xxxxxxxxxxxxxxxx>, Ryan Hickman <ryan@xxxxxxxxxxxxxxxx><mailto:ryan@xxxxxxxxxxxxxxxx>, support-conduit@xxxxxxxxxxxxxxxx<mailto:support-conduit@xxxxxxxxxxxxxxxx> <conduit@xxxxxxxxxxxxxxxx><mailto:conduit@xxxxxxxxxxxxxxxx> Subject: Re: [conduit] [ldm-users] Missing GFS files on conduit this morning Becky, I can confirm that I think we've gotten everything that should be on CONDUIT since the 06 UTC runs last night (20180222 06 runs.) It actually started up part way through the 00 UTC GFS run. Thanks to all involved for the work getting things back up. I've been following on the IDP mailing list, sounds like a nightmare! Pete -- Pete Pokrandt - Systems Programmer UW-Madison Dept of Atmospheric and Oceanic Sciences 608-262-3086 - poker@xxxxxxxxxxxx<mailto:poker@xxxxxxxxxxxx> ________________________________ From: conduit-bounces@xxxxxxxxxxxxxxxx<mailto:conduit-bounces@xxxxxxxxxxxxxxxx> <conduit-bounces@xxxxxxxxxxxxxxxx<mailto:conduit-bounces@xxxxxxxxxxxxxxxx>> on behalf of Rebecca Cosgrove - NOAA Federal <rebecca.cosgrove@xxxxxxxx<mailto:rebecca.cosgrove@xxxxxxxx>> Sent: Thursday, February 22, 2018 12:56 PM To: Phil Birnie Cc: ldm-users@xxxxxxxxxxxxxxxx<mailto:ldm-users@xxxxxxxxxxxxxxxx>; Ryan Hickman; support-conduit@xxxxxxxxxxxxxxxx<mailto:support-conduit@xxxxxxxxxxxxxxxx> Subject: Re: [conduit] [ldm-users] Missing GFS files on conduit this morning Hi Phil. We're far enough along in our recovery that we believe CONDUIT is up and running again. Please let me know if this is not the case. Becky On Wed, Feb 21, 2018 at 8:04 PM, Phil Birnie <me@xxxxxxxxxxxxxx<mailto:me@xxxxxxxxxxxxxx>> wrote: Hey All, I’m assuming the CONDUIT feed is still unstable — haven’t received any model data since about 15Z this morning… If I’m incorrect, let me know. - phil From: Ryan Hickman <ryan@xxxxxxxxxxxxxxxx><mailto:ryan@xxxxxxxxxxxxxxxx> Reply: Ryan Hickman <ryan@xxxxxxxxxxxxxxxx><mailto:ryan@xxxxxxxxxxxxxxxx> Date: February 20, 2018 at 2:36:40 PM To: Patrick L. Francis <wxprofessor@xxxxxxxxx><mailto:wxprofessor@xxxxxxxxx> Cc: ldm-users@xxxxxxxxxxxxxxxx<mailto:ldm-users@xxxxxxxxxxxxxxxx> <ldm-users@xxxxxxxxxxxxxxxx><mailto:ldm-users@xxxxxxxxxxxxxxxx>, support-conduit@xxxxxxxxxxxxxxxx<mailto:support-conduit@xxxxxxxxxxxxxxxx> <conduit@xxxxxxxxxxxxxxxx><mailto:conduit@xxxxxxxxxxxxxxxx> Subject: Re: [ldm-users] [conduit] Missing GFS files on conduit this morning I, too, have the GFS 12 UTC GRIB2 files in a publicly available location should anyone wish to access them. https://storage.googleapis.com/ah-maps-raw/GFS_20180220120000_20180220120000.grib2 (F001) https://storage.googleapis.com/ah-maps-raw/GFS_20180220120000_20180220130000.grib2 (F002) etc. etc. through 120 hours. https://storage.googleapis.com/ah-maps-raw/GFS_20180220120000_20180225120000.grib2 (F120) On Tue, Feb 20, 2018 at 11:45 AM, Patrick L. Francis <wxprofessor@xxxxxxxxx<mailto:wxprofessor@xxxxxxxxx>> wrote: somebody just asked where the files are when they looked in this directory http://modelweather.com/noaaport/dish/ncep/model/gfs/ my fault.. I didn't explain very well.. sorry! since GEMPAK is being phased out, I am writing a custom ingest package for our internal uses, and filing the products as each source sends them over NOAAPort for example, GFS which was brought up today comes over the dish as: 71550 20180220035934.747355 NGRID 19629065 YRPK40 KWBC 200000 !grib2/ncep/GFS/#003/201802200000F072/RELH/400 hPa PRES where: 'ncep' is the source 'GFS' is the model '#003' is the grid so I chose to file things as ../root/www/dir/noaaport/dish/'source'/'model'/'grid'/ and then instead of a crazy filename.. simply pipe everything into YYYYMMDD.HHHH.{F}HHH.grib so all variables for each product are filed into the corresponding date, hour, and forecast hour by model type. then with NIDS data for example, I file all products by: ../root/www/dir/noaaport/dish/nids/'source'/'radome'/'prod'/ YYYYMMDD.HHMM.nid so to answer the unspoken person's question, while this is a work in progress for me internally, of course I don't mind sharing with the unidata community if you should need to grab something... unidata is good people Eventually I hope to file every single product that comes over noaaport, because what I'm doing is instead of copying from pqact.gempak, writing everything manually by parsing the notifyme output of every feed.. it just takes awhile.. but this way, products will be able to be used natively with MetPy and other new apps being developed cheers, --patrick ----------------------- Patrick L. Francis AerisWeather.com modelweather.com<http://modelweather.com> -- _______________________________________________ NOTE: All exchanges posted to Unidata maintained email lists are recorded in the Unidata inquiry tracking system and made publicly available through the web. Users who post to any of the lists we maintain are reminded to remove any personal information that they do not want to be made public. ldm-users mailing list ldm-users@xxxxxxxxxxxxxxxx<mailto:ldm-users@xxxxxxxxxxxxxxxx> For list information or to unsubscribe, visit: http://www.unidata.ucar.edu/mailing_lists/ _______________________________________________ NOTE: All exchanges posted to Unidata maintained email lists are recorded in the Unidata inquiry tracking system and made publicly available through the web. Users who post to any of the lists we maintain are reminded to remove any personal information that they do not want to be made public. ldm-users mailing list ldm-users@xxxxxxxxxxxxxxxx<mailto:ldm-users@xxxxxxxxxxxxxxxx> For list information or to unsubscribe, visit: http://www.unidata.ucar.edu/mailing_lists/ _______________________________________________ NOTE: All exchanges posted to Unidata maintained email lists are recorded in the Unidata inquiry tracking system and made publicly available through the web. Users who post to any of the lists we maintain are reminded to remove any personal information that they do not want to be made public. conduit mailing list conduit@xxxxxxxxxxxxxxxx<mailto:conduit@xxxxxxxxxxxxxxxx> For list information or to unsubscribe, visit: http://www.unidata.ucar.edu/mailing_lists/
ldm-users archives: