axes scale

• To: "'Don Murray '" <dmurray@xxxxxxxxxxxxxxxx>, "'John Osborne '" <John.Osborne@xxxxxxxx>
• Subject: axes scale
• From: "Brobbey,Isaac" <IBBrobbey@xxxxxxxxxxxxxxx>
• Date: Mon, 19 Aug 2002 17:13:12 -0400

 i have similar question relating to this one ask by John:
i have a display which currently sets the scale from (0,39), but i want the
scale to cover up to say 50 and have the data distributed over it.
is there anyway i can manually changed the scale ?
 thanks

Isaac

-----Original Message-----
From: Don Murray
To: John Osborne
Sent: 8/19/02 4:21 PM
Subject: Re: Reversed axes and connect the dots?

Hi John-

John Osborne wrote:


> Thanks for your suggestions. Yes, our depths are stored as positive 
> numbers. Using a RealType.Altitude, I was confused how to set the
units 
> to what you suggested. RealType.Altitude is a static class and I don't

> see a method in RealType or it's parent classes for setting units--it 
> appears to only happen in the constructors for RealType (or through
the 
> new factory methods). I also tried reversing the max and min for the 
> axis using setRange but that didn't work either--the data points 
> disappeared and the axis showed the usual orientation.

• Follow-Ups:
  • Re: axes scale
    • From: Bill Hibbard