NOTICE: This version of the NSF Unidata web site (archive.unidata.ucar.edu) is no longer being updated.
Current content can be found at unidata.ucar.edu.
To learn about what's going on, see About the Archive Site.
Robert, The log message that the tables in $GEMTBL/grid are not being found indicate that you need to check the definition you have for -e GEMTBL=.... in the pqact.conf action. The path shown below is that which I use, but you may have to change it for your site depending on where your GEMTBL environmental variable points to. The pattern below will catch all the GRIB datafrom NOAAPORT, grib products from the NPGAPS feed, and grib products in the CONDUIT data feeds: Eg, HDS ^[HOYZ].* H, Y and Z are most of the model data, O is oceanographic grids NOGAPS ^US058.* If you feed NOGAPS data from FNMOC as one of the optional IDD streams, this will be the global grid 240 NOGAPS and the COMPS regional grids. NMC2 ^/u/ftp/gateway/.* These are the conduit grids which are available under the NMC2 feedtype (they are very large in volume) so only a feew sites feed these. For just the NOAAPORT IDD grids, you could shorten this to the HDS pattern shown above. Steve Chiswell Unidata User Support >From: Robert Leche <address@hidden> >Organization: UCAR/Unidata >Keywords: 200108242105.f7OL52124679 >I am having trouble with any product that is using the dcgrib or dcgrib2 >programs. >Of course spaces characters where properly translated into tab >characters. >The following example produces broke pipes: > >HDS|NMC2|NOGAPS ^(/u/ftp/gateway|[HOYZ]|US058).* > PIPE -close > decoders/dcgrib2 > -d data/gempak/logs/dcgrib.log > -e GEMTBL=/home/gempak/NAWIPS/gempak/tables > >Some of the ldmd.log errors: >Aug 23 18:17:33 sirocco pqact[22660]: pipe_dbufput: >decoders/dcgrib2-ddata/gempak/logs/dcgrib.log-eGEMTBL=/home/gempak/NAWIPS/gemp > ak/tables >write error >Aug 23 18:17:33 sirocco pqact[22660]: pipe_prodput: trying again >Aug 23 18:17:40 sirocco pqact[22660]: pbuf_flush (4) write: Broken pipe >Aug 23 18:17:47 sirocco last message repeated 3 times >Aug 23 18:17:47 sirocco pqact[22660]: pipe_dbufput: >decoders/dcgrib2-ddata/gempak/logs/dcgrib.log-eGEMTBL=/home/gempak/NAWIPS/gemp > ak/tables >write error >Aug 23 18:17:47 sirocco pqact[22660]: pipe_prodput: trying again >Aug 23 18:17:50 sirocco pqact[22660]: pbuf_flush (4) write: Broken pipe >Aug 23 18:17:50 sirocco pqact[22660]: pipe_dbufput: >decoders/dcgrib2-ddata/gempak/logs/dcgrib.log-eGEMTBL=/home/gempak/NAWIPS/gemp > ak/tables >write error >Aug 23 18:17:50 sirocco pqact[22660]: pipe_prodput: trying again >Aug 23 18:17:50 sirocco pqact[22660]: pbuf_flush (4) write: Broken pipe >Aug 23 18:17:50 sirocco pqact[22660]: pbuf_flush (4) write: Broken pipe >Aug 23 18:17:50 sirocco pqact[22660]: pipe_dbufput: >decoders/dcgrib2-ddata/gempak/logs/dcgrib.log-eGEMTBL=/home/gempak/NAWIPS/gemp > ak/tables >write error >Aug 23 18:17:50 sirocco pqact[22660]: pipe_prodput: trying again >Aug 23 18:17:50 sirocco pqact[22660]: pbuf_flush (4) write: Broken pipe >Aug 23 18:17:55 sirocco pqact[22660]: pbuf_flush (5) write: Broken pipe >Aug 23 18:18:01 sirocco pqact[22660]: pbuf_flush (5) write: Broken pipe >Aug 23 18:18:01 sirocco pqact[22660]: pbuf_flush (4) write: Broken pipe >Aug 23 18:18:23 sirocco last message repeated 5 times >Aug 23 18:18:28 sirocco pqact[22660]: pbuf_flush (5) write: Broken pipe >Aug 23 18:18:28 sirocco pqact[22660]: pbuf_flush (5) write: Broken pipe > >Both directories data/gempak/logs/ and /home/gempak/NAWIPS/gempak/tables >exist (Although subdirectory home/gempak/NAWIPS/gempak/tables is empty). > >The dcgrib.log: >[ldm@sirocco gempak]$ more logs/dcgrib.log >[6663] 010821/0840 [DC 3] >[6663] 010821/0840 [DC -11] >[6663] 010821/0840 [NA -1] cntrgrib1.tbl >[6663] 010821/0840 [DCGRIB -51] can't open grib tables [NA -51], set >GEMTBL >[6663] 010821/0840 [DC 5] >[6663] 010821/0840 [DC 2] Number of bulletins read and processed: 0 >[6663] 010821/0840 [DC 6] >[6664] 010821/0840 [DC 3] >[6664] 010821/0840 [DC -11] >[6664] 010821/0840 [NA -1] cntrgrib1.tbl >[6664] 010821/0840 [DCGRIB -51] can't open grib tables [NA -51], set >GEMTBL >[6664] 010821/0840 [DC 5] >[6664] 010821/0840 [DC 2] Number of bulletins read and processed: 0 >[6664] 010821/0840 [DC 6] >[6665] 010821/0840 [DC 3] >[6665] 010821/0840 [DC -11] >[6665] 010821/0840 [NA -1] cntrgrib1.tbl >[6665] 010821/0840 [DCGRIB -51] can't open grib tables [NA -51], set >GEMTBL >[6665] 010821/0840 [DC 5] >[6665] 010821/0840 [DC 2] Number of bulletins read and processed: 0 >[6665] 010821/0840 [DC 6] >[6666] 010821/0840 [DC 3] >[6666] 010821/0840 [DC -11] > >Also, what is: /u/ftp/gateway|[HOYZ]|US058) Is this a feed via ftp or >idd? > >Ciao, > >Bob >address@hidden > > >