NOTICE: This version of the NSF Unidata web site (archive.unidata.ucar.edu) is no longer being updated.
Current content can be found at unidata.ucar.edu.

To learn about what's going on, see About the Archive Site.

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

20000621: ldm-mcidas-7.6.3 problem

>From: Harry Edmon <address@hidden>
>Organization: University of Washington
>Keywords: 200006211950.e5LJoMT17665 ldm-mcidas 7.6.3

Harry,

>I have a problem on my Sparc SunOS 5.6 system.

I made binary distribution for ldm-mcidas 7.6.3 available for this OS.

>When I type "make", everything
>makes file.

The output you include below shows that the make was trying to build
area2png when if failed.  This should have been made at the 'make'
step, so I am confused.

>When I type "make install" I get:
>
>+ make decoders_install whatis 
>
>making `install' in directory /home/disk/ldm/ldm-mcidas-7.6.3/src/port
>
>
>making `install' in directory /home/disk/ldm/ldm-mcidas-7.6.3/src/port/misc
>
>make  /home/disk/ldm/ldm-mcidas-7.6.3/lib
>LIBDIR=/home/disk/ldm/ldm-mcidas-7.6.3/lib
>`/home/disk/ldm/ldm-mcidas-7.6.3/lib' is updated.
>ar rcuv /home/disk/ldm/ldm-mcidas-7.6.3/lib/libudport.a uddummy.o
>ranlib /home/disk/ldm/ldm-mcidas-7.6.3/lib/libudport.a
>no need to ranlib anymore

After running make, the libudport.a library should have been made.  It is
strange that it was being updated during the make install step.

>returning to directory /home/disk/ldm/ldm-mcidas-7.6.3/src/port
>
>
>making `install' in directory /home/disk/ldm/ldm-mcidas-7.6.3/src/port/cfortra
> n
>
>
>returning to directory /home/disk/ldm/ldm-mcidas-7.6.3/src/port
>
>`install' is updated.
>
>returning to directory /home/disk/ldm/ldm-mcidas-7.6.3/src
>
>
>making `install' in directory /home/disk/ldm/ldm-mcidas-7.6.3/src/decode
>
>cc -o area2png alarm.o pngsubs.o area2png.o -L/usr/local/ldm/lib -lldm -lX11
>../port/misc/libudport.a -lnetcdf -L../libpng -lpng -L../zlib -lz -R/usr/ucbli
> b
>-L/usr/ucblib -lrpcsoc -lnsl -lsocket -lsocket  -lm || (rm -f area2png; exit 1
> )
>ld: fatal: file ../port/misc/libudport.a: cannot open file: No such file or
>directory

So, the extra 'ar rcuv /home/disk/ldm/ldm-mcidas-7.6.3/lib/libudport.a 
uddummy.o'
step seems to have hammered libudport.a.  This is the cause of the failure.

>*** Error code 1
>make: Fatal error: Command failed for target `area2png'
>Current working directory /home/disk/ldm/ldm-mcidas-7.6.3/src/decode
>*** Error code 1
>make: Fatal error: Command failed for target `installed_binfiles'
>Current working directory /home/disk/ldm/ldm-mcidas-7.6.3/src/decode
>*** Error code 1
>make: Fatal error: Command failed for target `decode/install'
>Current working directory /home/disk/ldm/ldm-mcidas-7.6.3/src
>*** Error code 1
>make: Fatal error: Command failed for target `install'

At this point, I would:

cd src
make distclean
ls port/misc/*.o               <- to see if something is screwed up
./configure
make
make test
make install

Tom

>From address@hidden Wed Jun 21 14:43:35 2000
>Subject: Re: 20000621: ldm-mcidas-7.6.3 problem

Your last suggestion worked fine.  Thanks.

--
Dr. Harry Edmon                 E-MAIL: address@hidden
(206) 543-0547                  FAX:    (206) 543-0308
Dept of Atmospheric Sciences
University of Washington, Box 351640, Seattle, WA 98195-1640