NOTICE: This version of the NSF Unidata web site (archive.unidata.ucar.edu) is no longer being updated.
Current content can be found at unidata.ucar.edu.
To learn about what's going on, see About the Archive Site.
NOTICE: This version of the NSF Unidata web site (archive.unidata.ucar.edu) is no longer being updated.
Current content can be found at unidata.ucar.edu.
To learn about what's going on, see About the Archive Site.
Dave
I found the netcdf.mod file in the same location
("/usr/include/netcdf.mod ).
I noticed that its type is movie clip.
Is it correct type?.
Also I noticed. I do not have any netcdf files with the .a extension .
For example I found the libnetcdf file with .so.4 extension in the
(usr/lib64/ libnetcdf.so.4) not the libnetcdf.a as you mention in your
massage.
thanks
Mohamed Ali
malibec2005@xxxxxxxxx
Mob 00447912033240
SChEME Department
Faculty of Engineering
University of Nottingham
Nottingham (NG7 2RD) UK
Fax: 0044(0)115 951 4115
-----Original Message-----
From: netcdfgroup-bounces@xxxxxxxxxxxxxxxx
[mailto:netcdfgroup-bounces@xxxxxxxxxxxxxxxx] On Behalf Of Dave Allured
Sent: Tuesday, November 11, 2008 5:55 PM
To: netcdfgroup@xxxxxxxxxxxxxxxx
Subject: Re: [netcdfgroup] netcdf
Mohamed,
Regarding the error "/usr/include/netcdf.mod is not a valid module
information file", this is an important file for the Fortran 90
interface. You need to debug this. Please find the correct location of
netcdf.mod on your system, and change the path in the -I command
argument to match.
This file might be in the same directory as the library file
libnetcdf.a, or a different directory. The standard install location
for this file is, I think, in a separate "include"
directory. Good luck.
--Dave
Mohamed Mohamed wrote:
> Dave
>
> Thanks for your help. I made simple Fortran programs and it is going
> well.
>
> I made you simple test program but I had this statement "Fatal Error:
> netcdftest.f90, line 2: /usr/include/netcdf.mod is not a valid module
> information file
> detected at NETCDF@<end-of-statement>"
>
> Thanks
>
>
> Mohamed Ali
> malibec2005@xxxxxxxxx
> Mob 00447912033240
>
> SChEME Department
> Faculty of Engineering
> University of Nottingham
> Nottingham (NG7 2RD) UK
> Fax: 0044(0)115 951 4115
>
> -----Original Message-----
> From: netcdfgroup-bounces@xxxxxxxxxxxxxxxx
> [mailto:netcdfgroup-bounces@xxxxxxxxxxxxxxxx] On Behalf Of Dave
> Allured
> Sent: Monday, November 10, 2008 8:52 PM
> To: netcdfgroup@xxxxxxxxxxxxxxxx
> Subject: Re: [netcdfgroup] netcdf
>
> Mohamed,
>
> The statement "use netcdf" goes into your fortran 90 program below the
> program or subroutine or function statement, and above "implicit
none".
> You should study and understand Fortran 90 modules before working on
> this program.
>
> See if you can get this simple test program to compile and run:
>
> program netcdf_version
> use netcdf
> print *, trim(nf90_inq_libvers())
> end
>
> The compile command should look something like this:
>
> f90 netcdf_version.f90 -I/usr/include -L/usr/lib64 -lnetcdf
>
> where the include directory contains the file netcdf.mod.
>
> Is there any chance that you have old Fortran 77 code that somehow got
> renamed to ".f90" without complete conversion to Fortran 90?
>
> --Dave
>
> Mohamed Mohamed wrote:
>> Dave,
>>
>> Thanks, I think it is may be the solution. However I am still a
>> beginner in the Linux. So please could you tell me what to do.
>>
>>
>> You said " I suspect that you need to add this to the top of each
>> program unit that has Netcdf calls:
>>
>> use netcdf " My question is how ?
>>
>> Find below a long part of the error. Please have a look.
>>
>> f_ts.o vdif_uv.o vertvl_edge.o water_depth.o wreal.o ghostuv.o
>> dens3.o
>
>> init_sed.o advave_edge_gcy.o advection_edge_gcy.o adv_uv_edge_gcy.o
>> bcond_gcy.o shape_coef_gcy.o depth_check.o vdif_ts_gom.o adjust_ts.o
>> shutdown_check.o extelpf_edge.o fct_q2.o fct_q2l.o viscofh.o
>> print_vals.o rho_mean.o viz.o -L/usr/lib64 -lnetcdf
>> mod_ncdio.o: In function `__mod_ncdio__handle_ncerr':
>> mod_ncdio.f90:(.text+0x125): undefined reference to
>> `__netcdf__nf90_strerror'
>> mod_ncdio.o: In function `__mod_ncdio__putvar':
>> mod_ncdio.f90:(.text+0x11e4): undefined reference to
>> `__netcdf__nf90_put_var_2d_fourbytereal'
>
> <snip many messages>
>
>> Thanks
>>
>> Mohamed Ali
>> malibec2005@xxxxxxxxx
>> Mob 00447912033240
>>
>> SChEME Department
>> Faculty of Engineering
>> University of Nottingham
>> Nottingham (NG7 2RD) UK
>> Fax: 0044(0)115 951 4115
>>
>> -----Original Message-----
>> From: netcdfgroup-bounces@xxxxxxxxxxxxxxxx
>> [mailto:netcdfgroup-bounces@xxxxxxxxxxxxxxxx] On Behalf Of Dave
>> Allured
>> Sent: Thursday, November 06, 2008 5:50 PM
>> To: netcdfgroup@xxxxxxxxxxxxxxxx
>> Subject: Re: [netcdfgroup] netcdf
>>
>> Mohamed,
>>
>> These are missing library symbol errors. I suspect that you need to
>> add this to the top of each program unit that has Netcdf calls:
>>
>> use netcdf
>>
>> This is because the Netcdf Fortran 90 interface uses modules. You
>> can't properly link to the Netcdf F90 library without this
> declaration.
>> For diagnosis, your program is trying to link to this:
>>
>> __netcdf__nf90_open
>>
>> But with a correct "use" statement it should be seeking a symbol
>> named
>
>> something like this (the name change may vary by compiler and
>> platform):
>>
>> ___netcdf_MOD_nf90_open
>>
>> I might be wrong about all of this if you are on a platform or
>> compiler that uses Fortran 90 linking conventions much different than
>> what I am familiar with. If "use" doesn't fix it, then please
>> provide
>
>> identification and version info for your platform, compiler, and
>> netcdf version.
>>
>> Dave Allured
>> CU/CIRES Climate Diagnostics Center (CDC)
>> http://cires.colorado.edu/science/centers/cdc/
>> NOAA/ESRL/PSD, Climate Analysis Branch (CAB) http://www.cdc.noaa.gov/
>>
>> Mohamed Mohamed wrote:
>>> I worked with FVCOM software. When I started to get netcdf output
>>> type I received the following error:
>>>
>>> mod_lag.f90:(.text+0x89f6): undefined reference to
>>> `__netcdf__nf90_put_att_text'
>>> mod_lag.f90:(.text+0x8a1e): undefined reference to
>>> `__netcdf__nf90_put_att_text'
>
> <snip many messages>
> _______________________________________________
> netcdfgroup mailing list
> netcdfgroup@xxxxxxxxxxxxxxxx
> For list information or to unsubscribe, visit:
> http://www.unidata.ucar.edu/mailing_lists/
>
> This message has been checked for viruses but the contents of an
> attachment may still contain software viruses, which could damage your
computer system:
> you are advised to perform your own checks. Email communications with
> the University of Nottingham may be monitored as permitted by UK
legislation.
>
> _______________________________________________
> netcdfgroup mailing list
> netcdfgroup@xxxxxxxxxxxxxxxx
> For list information or to unsubscribe, visit:
> http://www.unidata.ucar.edu/mailing_lists/
_______________________________________________
netcdfgroup mailing list
netcdfgroup@xxxxxxxxxxxxxxxx
For list information or to unsubscribe, visit:
http://www.unidata.ucar.edu/mailing_lists/
This message has been checked for viruses but the contents of an attachment
may still contain software viruses, which could damage your computer system:
you are advised to perform your own checks. Email communications with the
University of Nottingham may be monitored as permitted by UK legislation.
netcdfgroup archives: